Brand Name:
Huawei
Model Number:
S5735-S48U4XE-V2
Document:
| Model | S5735-S48U4XE-V2 |
|---|---|
| Part Number | 98012059 |
| Description | S5735-S48U4XE-V2 (48×10/100/1000BASE-T ports, 4×10GE SFP+ ports, 2×12GE stack ports, PoE++, without power module) |
| Dimensions (H × W × D) |
Basic: 43.6 mm × 442.0 mm × 420.0 mm (1.72 in. × 17.40 in. × 16.54 in.) Maximum: 43.6 mm × 442.0 mm × 446.0 mm (1.72 in. × 17.40 in. × 17.56 in.) |
| Weight with Packaging | 8.02 kg (17.68 lb) |
| Typical Power Consumption | 56.23 W |
| Maximum Power Consumption |
Without PoE: • 70.15 W (with two 600 W AC power modules) • 74.22 W (with two 1000 W AC power modules) • 83.66 W (with two 1000 W DC power modules) Full PoE load: • 3117.00 W (PoE: 2880 W, with three 1000 W AC power modules) |
| PoE Support | Supported |
| No. | Indicator | Name | Color | Status | Description |
|---|---|---|---|---|---|
| 1 | PWR | Power module indicator | - | Off | The switch is powered off. |
| Green | Steady on | The power supply is normal. | |||
| Yellow | Steady on | The switch has multiple power modules installed. Any power module slot shows this when: a module is available but not connected to power, or the power module has failed. | |||
| 2 | SYS | System status indicator | - | Off | The system is not running. |
| Green | Fast blinking | The system is starting. | |||
| Green | Steady on | System startup preparation phase (max 30 seconds). | |||
| Green | Slow blinking | The system is running normally. | |||
| Red | Steady on | System malfunction after registration, or fan/temperature alarm. | |||
| 3 | MST | Stack indicator | - | Off | Default: Switch is standby/slave in stack or stacking disabled. Mode change: Stack mode not selected. |
| Green | Steady on | Stack mode selected. Switch is standby/slave, service ports show stack ID. | |||
| Green | Blinking | Default: Master switch in stack or standalone with stacking enabled. Mode change: Stack mode selected, service ports show master stack ID. | |||
| 4 | PoE | PoE indicator | - | Off | PoE mode not selected. |
| Green | Steady on | PoE mode selected, service ports show PoE status. | |||
| 5 | MODE | Mode switch button | - | - | Press once: Service ports show stack mode and local stack ID. Press twice: Service ports show PoE mode and port status. Press three times: Service ports restore to default mode (connection status and link activity). Auto-restore to default mode after 45 seconds inactivity. |
| 6 | - | Electrical service port indicator | - | - | One indicator per port. Meanings vary by mode (see documentation tables). Arrowheads indicate port positions. |
| 7 | - | Optical service port indicator | - | - | Two indicators per port: ACT (yellow, left) and LINK (green, right). Arrowheads indicate port positions. |
| 8 | ID | ID indicator | - | Off | ID indicator not used (default). |
| Blue | Steady on | Identifies switch for maintenance. Can be remotely controlled. | |||
| 9 | USB | USB-based deployment indicator | - | Off | No USB flash drive installed, or indicator failure. |
| Green | Steady on | USB-based deployment successful (or repeated deployment without configuration file). | |||
| Green | Blinking | USB-based deployment in progress. | |||
| Red | Steady on | USB-based deployment failed. |
Send your inquiry directly to us
