起源の場所:
中国
ブランド名:
Huawei
証明:
CE
モデル番号:
S5735I-H8U2XN-V2
| Item | Details |
|---|---|
| Description | S5735I-H8U2XN-V2 (8*10/100/1000BASE-T ports, PoE++, 2*10GE SFP+ ports, DIN Rail Mounting, Dual redundant 54 to 57V DC supply, Fanless, 1588, Without power module) |
| Part Number | 98012685 |
| Model | S5735I-H8U2XN-V2 |
| First supported version | V600R024C10 |
|
1 |
One USB port |
2 |
Dual DC power input port NOTE:
It must be used with 5-Pin DC Power Terminal, which are included in the auxiliary material package delivered with the device. It supports dual DC power supplies, , that is, DC1 and DC2. One console port |
|
3 |
One DI port |
4 |
One DO port |
|
5 |
Ground screw NOTE:
It is used with a ground cable.
|
6 |
One console port |
|
7 |
Two 10GE SFP+ ports |
8 |
Eight 10/100/1000BASE-T PoE++ ports |
Table 4-1418 Ports on the S5735I-H8U2XN-V2
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. |
Ethernet cable |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. |
|
| Console port | RJ45 | The console port is connected to a console for on-site configuration. |
Console cable |
| USB port | USB 2.0 Type A |
The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. |
USB flash drive |
| DI port | 2x5-Pin Phoenix Connector |
The DI port is used to check active level signals. Signal type: 9.6 V to 30 V for state 1; –30 V to +3 V for state 0 |
2x5-Pin Phoenix Connector |
| DO port | 2x5-Pin Phoenix Connector |
The DO port outputs signals so that the connected device can take corresponding actions. Signal type: Passive DO signals, Boolean value (short circuit and open circuit) External power supply: voltage less than 60 V DC and circuit current less than 0.5 A |
2x5-Pin Phoenix Connector |
私達にあなたの照会を直接送りなさい
