สถานที่กำเนิด:
จีน
ชื่อแบรนด์:
Huawei
ได้รับการรับรอง:
CE
หมายเลขรุ่น:
S5735I-H8T4S2XN-V2
| Item | Details |
|---|---|
| Description | S5735I-H8T4S2XN-V2 (8*10/100/1000BASE-T ports, 4*GE SFP ports,2*10GE SFP+ ports, DIN Rail Mounting, Dual redundant 9.6 to 60V DC supply, Fanless,Without power module) |
| Part Number | 98012185 |
| Model | S5735I-H8T4S2XN-V2 |
| First supported version | V600R023C00 |
|
1 |
Two DC input power sockets NOTE:
Applicable external power module: PAC240S56-CN (240 W PoE AC&HVDC Power) |
2 |
One console port |
|
3 |
One USB port |
4 |
DI port |
|
5 |
DO port |
6 |
RS485 port |
|
7 |
Ground screw NOTE:
It is used with a ground cable.
|
8 |
Eight 10/100/1000BASE-T ports |
|
9 |
Two 10GE SFP+ ports and four 1000BASE-X ports |
- |
- |
Table 4-1430 Ports on the S5735I-H8T4S2XN-V2
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. |
Ethernet cable |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. |
|
| GE SFP optical port | SFP |
A GE SFP Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s. NOTE:
In V600R023C00, if passing devices are configured to work in HSR mode and there is no north-south traffic, the service indicator is steady on. |
Industrial optical modules (only optical modules with 1 Gbit/s transmission speed and transmission distances less than or equal to 10 km are supported) |
| Console port | RJ45 | The console port is connected to a console for on-site configuration. |
Console cable |
| USB port | USB 2.0 Type A |
The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. |
USB flash drive |
| RS-485 port | 2x5-Pin Phoenix Connector |
The RS-485 port is used for data collection.
The default configurations of the RS-485 port are as follows:
NOTE:
During project implementation, if error packets occur on the line, it is recommended that 120 ohms be added between the head end and end of the line. |
2x5-Pin Phoenix Connector |
| DI port | 2x5-Pin Phoenix Connector |
The DI port is used to check remote communication input and level signals. Signal type: Passive DI signals, Boolean value (short circuit and open circuit) |
2x5-Pin Phoenix Connector |
| DO port | 2x5-Pin Phoenix Connector |
The DO port outputs signals so that the connected device can take corresponding actions. Signal type: Passive DO signals, Boolean value (short circuit and open circuit) External power supply: voltage less than 60 V DC and circuit current less than 0.5 A |
2x5-Pin Phoenix Connector |
ส่งข้อสอบของคุณตรงมาหาเรา
